Post by dragonguard on Sept 7, 2016 14:14:45 GMT
This script started as a proof of concept for a exploration script. When the Mog cake event started I decided that setting this up would be in my best interest. The script was developed and tested on a nox emulator so I don't know how well it does elsewhere. In addition, because this is more a proof of concept and its bound to have some issues i'm releasing this as open source, anyone is allowed to edit this and repost it including in compiled format. If you have any questions ask them in the comments, I will try to help you out.
The bot will start from the exploration selection screen (right before selecting a friend) or once you're inside the exploration screen (when you can move rain around) It will then move up into a combat area and move back and forth until it gets into combat. It will then click auto. For this reason i strongly recommend that you set limits on during auto and bring a healer with a aoe limit (lenna). After combat the bot will check how much gold it has and then either go back to looking for combat or move to the next area. The bot only collects one resource point at the moment. The bot will fail upon death, material limits, and connection time out (looking into how to fix the last one)
New update makes the move boxes dynamic by find a picture of rain on screen and then drawing the boxes around him using his height and width as parameters. This should mean that all phones sizes have equal movement.
Known issues: Phones still need to be looked at closer which is the next step, minitaurs can break the script by adding over the total gold, Ranking up was failing in the results screen (may be fixed)
After Mog cake event ends i will be switching over and working on phantom forest for esper grinds and working on a rank grind through espers. phantom forest is already avalaible here in a compiled form
( ankulua.boards.net/thread/167/brave-exvius-ffbeauto-farming-explorations )
previous script link: www.dropbox.com/s/uq5bcab3sdi9cer/FFBEBot.zip?dl=0
script link: www.dropbox.com/s/uxcra7y9se9bcnm/ffbe9-12-2016.zip?dl=0
Always open to suggestions, new ideas, new areas, etc. I program as a hobby so i do this in my off hours anyways (when not doing school, work, wife, etc)
EDIT1: added some information about what the bot did on exploration.
EDIT2: Fixed link
EDIT3: changed the way regions are created for movement and fixed a few minor bugs.
EDIT4: Fixed a few issues regarding mobile devices. Confirmed functionality on Samsung S5 and Nox.
EDIT5: fixed a bug in TM farm (could not find ESE.png) and a bug in dwarf farm (not clicking auto on final boss) for mobile devices.
The bot will start from the exploration selection screen (right before selecting a friend) or once you're inside the exploration screen (when you can move rain around) It will then move up into a combat area and move back and forth until it gets into combat. It will then click auto. For this reason i strongly recommend that you set limits on during auto and bring a healer with a aoe limit (lenna). After combat the bot will check how much gold it has and then either go back to looking for combat or move to the next area. The bot only collects one resource point at the moment. The bot will fail upon death, material limits, and connection time out (looking into how to fix the last one)
New update makes the move boxes dynamic by find a picture of rain on screen and then drawing the boxes around him using his height and width as parameters. This should mean that all phones sizes have equal movement.
Known issues: Phones still need to be looked at closer which is the next step, minitaurs can break the script by adding over the total gold, Ranking up was failing in the results screen (may be fixed)
After Mog cake event ends i will be switching over and working on phantom forest for esper grinds and working on a rank grind through espers. phantom forest is already avalaible here in a compiled form
( ankulua.boards.net/thread/167/brave-exvius-ffbeauto-farming-explorations )
previous script link: www.dropbox.com/s/uq5bcab3sdi9cer/FFBEBot.zip?dl=0
script link: www.dropbox.com/s/uxcra7y9se9bcnm/ffbe9-12-2016.zip?dl=0
Always open to suggestions, new ideas, new areas, etc. I program as a hobby so i do this in my off hours anyways (when not doing school, work, wife, etc)
EDIT1: added some information about what the bot did on exploration.
EDIT2: Fixed link
EDIT3: changed the way regions are created for movement and fixed a few minor bugs.
EDIT4: Fixed a few issues regarding mobile devices. Confirmed functionality on Samsung S5 and Nox.
EDIT5: fixed a bug in TM farm (could not find ESE.png) and a bug in dwarf farm (not clicking auto on final boss) for mobile devices.
EDITING SCRIPT
Here i will discuss how I edit this script, what i use and what you can do to edit and make your own changes.
For emulator I use a nox (android) set to 960H and 600W but ffbe changes that to something more along the lines of 375 width when started. My editor of choice is Sublime with a lua config added, steps to replicate will be at the bottom. In order to quickly edit your scripts you need to set up your scripts inside of the share folder in Nox, the default path is C:\Users\User_name\Nox_share\Other you can also access it by the bar on the right of nox. once you have the script in there you will need to point anakula there via its file explorer. I have not noticed any signs of the share folder hurting the scripts like with bluestacks.
For Mobile devices i use Filezilla and FTPdroid to create a ftp connection and transfer the files over to the device. When i need to do a edit i right click the file and do a edit, when i finish i go to filezilla and confirm the upload.
The above methods do not provide "live" edits. You must cancel a running script, and then press play again.
if there is any additional information needed just ask.
(answer taken from stackoverflow user Phrogz)
Install Package Control
Open the Command Palette (Ctrl-Shift-P on Windows or COMMAND + SHIFT + P on Mac)
Type something like "packins" to get the "Package Control: Install Package" item.
After a momentary pause a list of available packages will appear. Type "Lua" to filter to Lua packages.
My personal favorite is "Lua Dev". Select this package and Package Control will download and install the package for you.
From now on, if your have your syntax set to Lua for a file (Ctrl-Shift-P, "Set Syntax: Lua", or click in the bottom right corner of the window and choose Lua) then pressing F7 (aka Tools->Build) will evaluate the file using the Lua interpreter.
For emulator I use a nox (android) set to 960H and 600W but ffbe changes that to something more along the lines of 375 width when started. My editor of choice is Sublime with a lua config added, steps to replicate will be at the bottom. In order to quickly edit your scripts you need to set up your scripts inside of the share folder in Nox, the default path is C:\Users\User_name\Nox_share\Other you can also access it by the bar on the right of nox. once you have the script in there you will need to point anakula there via its file explorer. I have not noticed any signs of the share folder hurting the scripts like with bluestacks.
For Mobile devices i use Filezilla and FTPdroid to create a ftp connection and transfer the files over to the device. When i need to do a edit i right click the file and do a edit, when i finish i go to filezilla and confirm the upload.
The above methods do not provide "live" edits. You must cancel a running script, and then press play again.
if there is any additional information needed just ask.
(answer taken from stackoverflow user Phrogz)
Install Package Control
Open the Command Palette (Ctrl-Shift-P on Windows or COMMAND + SHIFT + P on Mac)
Type something like "packins" to get the "Package Control: Install Package" item.
After a momentary pause a list of available packages will appear. Type "Lua" to filter to Lua packages.
My personal favorite is "Lua Dev". Select this package and Package Control will download and install the package for you.
From now on, if your have your syntax set to Lua for a file (Ctrl-Shift-P, "Set Syntax: Lua", or click in the bottom right corner of the window and choose Lua) then pressing F7 (aka Tools->Build) will evaluate the file using the Lua interpreter.
