|
Post by akulatraxas on Jan 15, 2019 21:56:43 GMT
the new version of reroll works much better at 1-10. summon and repeat but seems to have issues between 1-1 and 1-3 sometimes at 1-4. I see either the expects the fights to finish too quickly or there is some other issue. It works fine afterwards, would very much appreciate if you could check 0racle Otherwise many thanks for your hard work, already rolled Bellona twice but didn't get a healer in the selective.
|
|
junah
New Member
Posts: 1
|
Post by junah on Jan 15, 2019 23:27:34 GMT
Hello! I liked your work and would like the password if you would, please ^^
Thanks for your hard work!
|
|
|
Post by 0racle on Jan 15, 2019 23:37:07 GMT
Password sent.
Regarding issues, I can fix it better if you could send me a video. The battle is a loop so it will not end until there is a conversation. Sometimes the script is not sync with the game because of network.
|
|
|
Post by o1001o1001o on Jan 16, 2019 5:03:11 GMT
Can this be used with our own login or does it only make a guest account? really is awesome is it still adding numbers to a name we pick? also what is cov summon 1 and cov summon 2? i just want it to clear 1-10 and summon
|
|
|
Post by 0racle on Jan 16, 2019 5:21:12 GMT
Can this be used with our own login or does it only make a guest account? really is awesome is it still adding numbers to a name we pick? also what is cov summon 1 and cov summon 2? i just want it to clear 1-10 and summon No. If you run the script with your own login, after reset, it still clicks on Guest account again. Normally we just do Guest account, if nat 5, link it to save it. The naming function is now for reset purpose only: finish 1-10 > get 5 bookmark and 200 skystones > summon > no 5* > set a name > reset, which required input the name again to confirm. Banner 1 = Bellona currently Banner 2 = empty, nothing atm. Previously there are 2 banners event at the same time. It was Destina (banner 1) and Cecilia (banner 2). So I just put all the options just in case. Covenant summon = normal rate for all heroes (not including the banner hero)
|
|
k
New Member
Posts: 1
|
Post by k on Jan 16, 2019 5:30:12 GMT
Thanks for sharing the script.
Good Job Done.
Possible to share the password for the script?
Thanks
|
|
|
Post by o1001o1001o on Jan 16, 2019 5:46:18 GMT
Can this be used with our own login or does it only make a guest account? really is awesome is it still adding numbers to a name we pick? also what is cov summon 1 and cov summon 2? i just want it to clear 1-10 and summon No. If you run the script with your own login, after reset, it still clicks on Guest account again. Normally we just do Guest account, if nat 5, link it to save it. The naming function is now for reset purpose only: finish 1-10 > get 5 bookmark and 200 skystones > summon > no 5* > set a name > reset, which required input the name again to confirm. Banner 1 = Bellona currently Banner 2 = empty, nothing atm. Previously there are 2 banners event at the same time. It was Destina (banner 1) and Cecilia (banner 2). So I just put all the options just in case. Covenant summon = normal rate for all heroes (not including the banner hero im still having an issue with the bot adding too many numbers to the reset do you have any tips? edit: to confirm it gets the name right and the random number correct but adds numbers in between
|
|
|
Post by 0racle on Jan 16, 2019 6:44:03 GMT
No. If you run the script with your own login, after reset, it still clicks on Guest account again. Normally we just do Guest account, if nat 5, link it to save it. The naming function is now for reset purpose only: finish 1-10 > get 5 bookmark and 200 skystones > summon > no 5* > set a name > reset, which required input the name again to confirm. Banner 1 = Bellona currently Banner 2 = empty, nothing atm. Previously there are 2 banners event at the same time. It was Destina (banner 1) and Cecilia (banner 2). So I just put all the options just in case. Covenant summon = normal rate for all heroes (not including the banner hero im still having an issue with the bot adding too many numbers to the reset do you have any tips? edit: to confirm it gets the name right and the random number correct but adds numbers in between Oh, forgot to tell. The bot will detect the numbers and input them automatically when do the reset. You only need to add the name, which contains a-z characters only. The random number is to prevent duplicate name.
|
|
|
Post by travishn on Jan 16, 2019 7:52:20 GMT
Hello, I've liked the post. Could I get the password as well please?
|
|
|
Post by 0racle on Jan 16, 2019 10:42:51 GMT
|
|
gmany
New Member
Posts: 9
|
Post by gmany on Jan 17, 2019 1:30:15 GMT
Hello, I have liked the post, can I get the password please?
|
|
c0de
New Member
Posts: 22
|
Post by c0de on Jan 17, 2019 22:10:24 GMT
Liked. Password please
|
|
|
Post by 0racle on Jan 18, 2019 4:19:32 GMT
password sent
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 18, 2019 13:59:57 GMT
hi 0racle ! Liked your work, please provide me with the password. Tyvm! btw, epic 7 does not work with rooted device, anyway to circumvent this?
|
|
|
Post by akashi on Jan 18, 2019 15:10:09 GMT
Hello, liked! May I have the password to try it please?
|
|