|
|
Post by katiklysm on Jun 3, 2019 19:20:26 GMT
I'm having very basic issues with the script. ie. Can't seem to get it to work as intended. It seems to be working- and so I don't expect that it is a daemon/accessibility or setup issue. I've also adhered to your 19:6 recommendation and am using Nox with fairly recent versioning. Settings and behavior all contained in video here: www.screencast.com/t/NaUwqjOHij9Basically, on Prologue, the script does very little- seems like its asleep, but does do a few actions every 30-45 seconds I guess. Once I pass prologue to any of the Chapter 1-x areas, it clicks the Pause/Settings menu and gets stuck in a loop. Seems like a screen/device issue- but I feel like I've met everything you designed for, anything I may be missing? Note: real time is not nearly as laggy as the recording- its just budget software not designed for this kind of usage. The lag probably isnt the issue- just the pause/menu clicks and no other useful clicks. Somewhat unrelated: Accessibility should work fine in place of daemon now right? they seem to do the same thing for me, both broken, but accessibility is much faster to test with. EDIT: Seems to work pretty well on Nox - Android 5.1.1 Emulator + Daemon. But still very poorly when following the exact same steps using a Nox - Android 7.1.2 Emulator + either Daemon or Accessibility. Is this expected? EDIT2: Nevermind. Seems like that Android 5.1.1 thing was a fluke. Worked great one time (on Low Quality mode of all things, since that is the Android 5 default)- once I tried it again by turning LQ mode off- it no longer works and even re-enabling LQ Mode does not fix. |
|
|
|
Post by 0racle on Jun 4, 2019 4:03:41 GMT
I'm having very basic issues with the script. ie. Can't seem to get it to work as intended. It seems to be working- and so I don't expect that it is a daemon/accessibility or setup issue. I've also adhered to your 19:6 recommendation and am using Nox with fairly recent versioning. Settings and behavior all contained in video here: www.screencast.com/t/NaUwqjOHij9Basically, on Prologue, the script does very little- seems like its asleep, but does do a few actions every 30-45 seconds I guess. Once I pass prologue to any of the Chapter 1-x areas, it clicks the Pause/Settings menu and gets stuck in a loop. Seems like a screen/device issue- but I feel like I've met everything you designed for, anything I may be missing? Note: real time is not nearly as laggy as the recording- its just budget software not designed for this kind of usage. The lag probably isnt the issue- just the pause/menu clicks and no other useful clicks. Somewhat unrelated: Accessibility should work fine in place of daemon now right? they seem to do the same thing for me, both broken, but accessibility is much faster to test with. EDIT: Seems to work pretty well on Nox - Android 5.1.1 Emulator + Daemon. But still very poorly when following the exact same steps using a Nox - Android 7.1.2 Emulator + either Daemon or Accessibility. Is this expected? EDIT2: Nevermind. Seems like that Android 5.1.1 thing was a fluke. Worked great one time (on Low Quality mode of all things, since that is the Android 5 default)- once I tried it again by turning LQ mode off- it no longer works and even re-enabling LQ Mode does not fix. Thanks for trying the script with different setting. In the video, the script was trying to click the Menu button then to go to the map. You should start the script in the map, or in lobby, not in the battle. Can you try again? |
|
|
|
Post by katiklysm on Jun 4, 2019 11:05:46 GMT
I'm having very basic issues with the script. ie. Can't seem to get it to work as intended. It seems to be working- and so I don't expect that it is a daemon/accessibility or setup issue. I've also adhered to your 19:6 recommendation and am using Nox with fairly recent versioning. Settings and behavior all contained in video here: www.screencast.com/t/NaUwqjOHij9Basically, on Prologue, the script does very little- seems like its asleep, but does do a few actions every 30-45 seconds I guess. Once I pass prologue to any of the Chapter 1-x areas, it clicks the Pause/Settings menu and gets stuck in a loop. Seems like a screen/device issue- but I feel like I've met everything you designed for, anything I may be missing? Note: real time is not nearly as laggy as the recording- its just budget software not designed for this kind of usage. The lag probably isnt the issue- just the pause/menu clicks and no other useful clicks. Somewhat unrelated: Accessibility should work fine in place of daemon now right? they seem to do the same thing for me, both broken, but accessibility is much faster to test with. EDIT: Seems to work pretty well on Nox - Android 5.1.1 Emulator + Daemon. But still very poorly when following the exact same steps using a Nox - Android 7.1.2 Emulator + either Daemon or Accessibility. Is this expected? EDIT2: Nevermind. Seems like that Android 5.1.1 thing was a fluke. Worked great one time (on Low Quality mode of all things, since that is the Android 5 default)- once I tried it again by turning LQ mode off- it no longer works and even re-enabling LQ Mode does not fix. Thanks for trying the script with different setting. In the video, the script was trying to click the Menu button then to go to the map. You should start the script in the map, or in lobby, not in the battle. Can you try again? Yes- I had only be starting in the battle because I can rarely get it to click through while in the menu. see here: www.screencast.com/t/HWgWL9n9The clicks don't properly work (for me) while attempting to use as it was designed to be, so I was trying different methods. EDIT: Also just downloaded Memu (instead of Nox) and re-setup everything in Memu. Same issues. |
|
|
|
Post by 0racle on Jun 5, 2019 3:37:30 GMT
Thanks for trying the script with different setting. In the video, the script was trying to click the Menu button then to go to the map. You should start the script in the map, or in lobby, not in the battle. Can you try again? Yes- I had only be starting in the battle because I can rarely get it to click through while in the menu. see here: www.screencast.com/t/HWgWL9n9The clicks don't properly work (for me) while attempting to use as it was designed to be, so I was trying different methods. EDIT: Also just downloaded Memu (instead of Nox) and re-setup everything in Memu. Same issues. Please, start script at menu, or map. Not in a battle menu. And at map 4 or 5, there is a tutorial, so expect it will waits for 10 or 15 seconds to skip the tutorial. Can you try again? and I already have this note in the first post: |
|
|
|
Post by pinarello23 on Jun 6, 2019 15:46:16 GMT
also get stuck after the map with iseria, it doesnt click ok and then misses the tutorial
|
|
|
|
Post by jacobson on Jun 8, 2019 18:01:44 GMT
Heylo Oracle! Thanks for taking the time to create this, it really helped me out a lot.
I just had 4 issues with it so far while using the latest v020 version and same resolution you use. I am using Nox emulator for this.
1. Half the time Vildred gets stuck after the first battle in the prologue, he just stands there but I can manually move him to the next fight and the script will just continue on after that.
2. The script can't seem to get Mercedes out of the mailbox, script just goes to Team section and just clicks on Ras and it just hangs there until it goes to map 1-3. It doesn't add Aither either.
3. The 1-4 boss with the aither tutorial, it cannot get past it without manual input but it continues on normally after that.
4. On the 1-5 map, the script gets stuck after speaking to Iseria, it either stands in the same room as her or goes to the next halfway and stands there. It says its looking for the diene image, so I can just move down the hallway and the script continues normally after that.
Besides these 4 issues that happen 95% of the time, everything else works flawlessly!
|
|
|
|
Post by 0racle on Jun 10, 2019 3:33:50 GMT
OK I will try to fix when have time. Busy with work deadline again.
|
|
dtn
New Member
Posts: 1
|
Post by dtn on Jun 12, 2019 14:26:58 GMT
thank!
I need it, can u give me pass.
|
|
|
|
Post by 0racle on Jun 12, 2019 15:15:51 GMT
thank! I need it, can u give me pass. no password needed |
|
|
|
Post by kaikeamorim12 on Jun 16, 2019 20:31:04 GMT
i use ldPlayer and i use the terms you stated to fully work , and i got some problems playing , most are on the prologue on the vildred part and the kise/ruele part on that part the characters dont move it seems that the script is sleeping , and the other problem is that it doesnt put aither on the team neither mercedes it just goes to the character equips tab , but other than that it goes trough 1-1 to 1-10 normally with some problems on 1-4 on the boss as the script sometimes just seems to sleep and you need to manually attack for it to be "ressucted"
|
|
|
|
Post by emiatej on Jul 3, 2019 20:10:29 GMT
Same probleme :/ I use NOX
|
|
envoy
New Member
Posts: 3 
|
Post by envoy on Jul 6, 2019 1:33:33 GMT
wondering what i did wrong i keep getting this error?
now have this error?
edit: got it to work but to walk it's stutter stepping any idea on a fix?
|
|
|
|
Post by 0racle on Jul 6, 2019 10:21:09 GMT
wondering what i did wrong i keep getting this error?
now have this error?
edit: got it to work but to walk it's stutter stepping any idea on a fix?
Sometimes it happens. Will fix and improve the script when I have time. |
|
envoy
New Member
Posts: 3
|
Post by envoy on Jul 6, 2019 11:09:57 GMT
keeps getting stuck after the prolouge while your in the tavern, then it wont do anything just hits the x top right repetively. then i try to skip it and just make it do 1-1 does the same thing with the x top right. also in the beginning it wont use moves i have to manually click them. awesome script though, let me know if theirs any fixes for the above.
|
|
|
|
Post by makethiseasierffs on Jul 16, 2019 4:00:39 GMT
Is there a tutorial on how to install this script? I'm new to this and for the life of me can't figure it out. Installing Ankulua and using it I sort of understand, but just getting the script to work is driving me nuts. Keeps giving me errors.
|
|
