|
|
Post by tbektas0 on Jun 15, 2019 2:50:40 GMT
Script always decides to get stuck on stage clear screen please send help Edit: Run :0 - Win Rate : 0/0 is says that non stop then stops working. LDplayer - daemon What is your resolution? Please uncheck [Low/High quality] in in-game setting. 1920x1080 Tablet resolution. I unchecked low and high quality disabled special effects but doesnt works. Edit :Doesnt work on NOX too. It clicks a few times then constantly prompts same message. I guess it doesnt recognize the fight. |
|
|
|
Post by yuki7776 on Jun 15, 2019 8:38:28 GMT
Hello 0racle i dont know if just me or anyone have this problem when my inventory go full even tho i check to sell the script go here and spam click on urgent mission i'll make video if you want and send it pm when i back from work or when i farm again |
|
|
|
Post by 0racle on Jun 15, 2019 13:43:39 GMT
Hello 0racle i dont know if just me or anyone have this problem when my inventory go full even tho i check to sell the script go here and spam click on urgent mission i'll make video if you want and send it pm when i back from work or when i farm again Thank you. Video always helps. Please send me when you have one. |
|
|
|
Post by 0racle on Jun 15, 2019 15:37:23 GMT
What is your resolution? Please uncheck [Low/High quality] in in-game setting. 1920x1080 Tablet resolution. I unchecked low and high quality disabled special effects but doesnt works. Edit :Doesnt work on NOX too. It clicks a few times then constantly prompts same message. I guess it doesnt recognize the fight. Please help to change dpi to 240 to see if it works? |
|
|
|
Post by 0racle on Jun 15, 2019 15:37:52 GMT
|
|
|
|
Post by holizab on Jun 16, 2019 9:49:42 GMT
Script always decides to get stuck on stage clear screen please send help Edit: Run :0 - Win Rate : 0/0 is says that non stop then stops working. LDplayer - daemon What is your resolution? Please uncheck [Low/High quality] in in-game setting. Having a similar problem in Nox, using accessibility settings in android 7 (with v50). When I try to start a hunt run it just flashes the run/winrate popup and never goes anywhere. When I try to do NPC Arena, it will scroll then popup saying 'Done'. Since it is scrolling it is clearly not an issue with the installation of AnkuLua. It seems like it is just failing to recognize any images. I've tied both 1280x720 and 1920x1080 both at 240 dpi. Neither works. I also only have 'Disable Special Effects' ticked in the in-game settings. It also happens no matter whether I use 'optimized images' and no matter what I set the similarity to. Can't seem to figure this out because both functions work just fine on my phone, which has an even higher resolution. |
|
|
|
Post by 0racle on Jun 16, 2019 10:17:02 GMT
What is your resolution? Please uncheck [Low/High quality] in in-game setting. Having a similar problem in Nox, using accessibility settings in android 7 (with v50). When I try to start a hunt run it just flashes the run/winrate popup and never goes anywhere. When I try to do NPC Arena, it will scroll then popup saying 'Done'. Since it is scrolling it is clearly not an issue with the installation of AnkuLua. It seems like it is just failing to recognize any images. I've tied both 1280x720 and 1920x1080 both at 240 dpi. Neither works. I also only have 'Disable Special Effects' ticked in the in-game settings. It also happens no matter whether I use 'optimized images' and no matter what I set the similarity to. Can't seem to figure this out because both functions work just fine on my phone, which has an even higher resolution. could you please advise? Not sure why the images cannot be properly recognized on some devices. |
|
|
|
Post by AnkuLua on Jun 16, 2019 10:34:24 GMT
Having a similar problem in Nox, using accessibility settings in android 7 (with v50). When I try to start a hunt run it just flashes the run/winrate popup and never goes anywhere. When I try to do NPC Arena, it will scroll then popup saying 'Done'. Since it is scrolling it is clearly not an issue with the installation of AnkuLua. It seems like it is just failing to recognize any images. I've tied both 1280x720 and 1920x1080 both at 240 dpi. Neither works. I also only have 'Disable Special Effects' ticked in the in-game settings. It also happens no matter whether I use 'optimized images' and no matter what I set the similarity to. Can't seem to figure this out because both functions work just fine on my phone, which has an even higher resolution. could you please advise? Not sure why the images cannot be properly recognized on some devices. Accessibility mode is not supported in emulators. Please install daemon or root. |
|
|
|
Post by holizab on Jun 16, 2019 10:37:25 GMT
Root doesn't work with Epic 7 because of strict root checking and daemon doesn't work with android 5+ unless you reinstall the daemon every time you open the emulator. Seems like a bad solution, but at least we know why it isn't working. I guess if I want it to work on an emulator I need to revert to android 4.4 on Nox and install the auto-loading daemon. 0racle it might be worth putting a note that you can only use this in android 4.4 Nox in the OP |
|
|
|
Post by 0racle on Jun 16, 2019 10:59:41 GMT
Root doesn't work with Epic 7 because of strict root checking and daemon doesn't work with android 5+ unless you reinstall the daemon every time you open the emulator. Seems like a bad solution, but at least we know why it isn't working. I guess if I want it to work on an emulator I need to revert to android 4.4 on Nox and install the auto-loading daemon. 0racle it might be worth putting a note that you can only use this in android 4.4 Nox in the OP My bad. I always install daemon everytime emu is restarted so I do not notice this issue much. |
|
|
|
Post by tbektas0 on Jun 16, 2019 11:29:27 GMT
|
|
|
|
Post by holizab on Jun 16, 2019 11:57:17 GMT
Root doesn't work with Epic 7 because of strict root checking and daemon doesn't work with android 5+ unless you reinstall the daemon every time you open the emulator. Seems like a bad solution, but at least we know why it isn't working. I guess if I want it to work on an emulator I need to revert to android 4.4 on Nox and install the auto-loading daemon. 0racle it might be worth putting a note that you can only use this in android 4.4 Nox in the OP My bad. I always install daemon everytime emu is restarted so I do not notice this issue much. Ok, makes sense. Well I did get it working with the auto-loading daemon in a Nox 4.4.2 instance, so we're all good. I can post up the instructions on how to do it if people need help. |
|
|
|
Post by 0racle on Jun 16, 2019 14:59:33 GMT
Is daemon installed? Please try this. Maybe accessibility option does not work on high android version. |
|
|
|
Post by aaalmao on Jun 16, 2019 22:33:48 GMT
|
|
|
|
Post by tbektas0 on Jun 16, 2019 22:46:17 GMT
Is daemon installed? Please try this. Maybe accessibility option does not work on high android version. Yeah I said in there. I was already using daemon also I tried image matching on emulators. Image matching doesnt work on emulators properly. I hope you can find a way to work with it. |
|
