|
|
Post by newbiex on Sept 11, 2020 16:09:38 GMT
Hi
Im trying to get the bot running.
Im using the Ld Player
Ankulua Pro with Membership
I have try it now to get the Bot working for hours. Currently, it is supported with Nox only - never tested with LDPlayer. Please try Nox and let me know. Thanks. |
|
|
|
Post by newbiex on Sept 11, 2020 16:19:29 GMT
Okay, now I've let it run up to 12hours, my second feedback and what I noticed, hope it helps: I've tried high and lowsec, mining all and priority Settings: Default Orbiting + Autoattack Highsec without prioritys runs really smooth for the most time, still just sometimes it stucks at the unload process, doesn't unload - warps back to belt, recognizes full cargo and back - Loops there until I give him a helping hand Highsec - if the belt is empty, the bot doesn't really know what to do - have to give him a helpin hand aswell - straight warp to another belt where asteroids are and he will continue mining, problem is back if the belt didn't respawn so far, cause he starts always at the first of the belt list Sometime he stucks at some high distanced ores aswell, so far couldn't really figure out when or why it happens, the bot locked a up to three different ores and approaches the wrong one , but is still targeting a different asteroid - so its out of mining range, cause it approches the wrong asteroid and is getting stucked in that kinda situation(Maybe a Lock reset/unlock function if the miner isn't running for a while?) or maybe let him approach the locked target? Maybe, what I got in my mind, let the bot check, based on settings (if possible), what kinda ores are in range after warp, let the ship stop and just start to mine the ores in range (on mining everything setting), if its not getting to complex  In lowsec - well as I said, the venture problem, that the bot starts to panic when a stranger appears, even if it is just another miner - but there I noticed another problem, that he warps sometimes to a station without docking, stays in front of the station for a while, warps back to a belt, sits there for a while and warps back again to the station and is in a loop (sometimes the cargo problem appeared in that kinda situation aswell) All in all, its running smooth if he is allowed to mine whatever he wants and in highsec, but would like to use it on lowsec more with a better panic function overall  Hope my feedback helps Running the bot on 4 clients and the problems happen from time to time to every toon Thanks for the feedback will try to put some changes base on your feedback. Few points here: #1. One of the main reason for the multiple ore lock is due to the screen colors. I need a better ways for that part - looking into this. #2. When you get that unloading issue, is the bot still waiting to land on a station? or it is already in the station? #3. If belt is empty (no ore) it will take time but if you leave it for awhile it will know and will try to move to another belt. #4. With safe mining, bot is warping even if other ship is in your alliance? |
|
|
|
Post by dakhun12 on Sept 11, 2020 16:24:52 GMT
Okay, now I've let it run up to 12hours, my second feedback and what I noticed, hope it helps: I've tried high and lowsec, mining all and priority Settings: Default Orbiting + Autoattack Highsec without prioritys runs really smooth for the most time, still just sometimes it stucks at the unload process, doesn't unload - warps back to belt, recognizes full cargo and back - Loops there until I give him a helping hand Highsec - if the belt is empty, the bot doesn't really know what to do - have to give him a helpin hand aswell - straight warp to another belt where asteroids are and he will continue mining, problem is back if the belt didn't respawn so far, cause he starts always at the first of the belt list Sometime he stucks at some high distanced ores aswell, so far couldn't really figure out when or why it happens, the bot locked a up to three different ores and approaches the wrong one , but is still targeting a different asteroid - so its out of mining range, cause it approches the wrong asteroid and is getting stucked in that kinda situation(Maybe a Lock reset/unlock function if the miner isn't running for a while?) or maybe let him approach the locked target? Maybe, what I got in my mind, let the bot check, based on settings (if possible), what kinda ores are in range after warp, let the ship stop and just start to mine the ores in range (on mining everything setting), if its not getting to complex In lowsec - well as I said, the venture problem, that the bot starts to panic when a stranger appears, even if it is just another miner - but there I noticed another problem, that he warps sometimes to a station without docking, stays in front of the station for a while, warps back to a belt, sits there for a while and warps back again to the station and is in a loop (sometimes the cargo problem appeared in that kinda situation aswell) All in all, its running smooth if he is allowed to mine whatever he wants and in highsec, but would like to use it on lowsec more with a better panic function overall Hope my feedback helps Running the bot on 4 clients and the problems happen from time to time to every toon Thanks for the feedback will try to put some changes base on your feedback. Few points here: #1. One of the main reason for the multiple ore lock is due to the screen colors. I need a better ways for that part - looking into this. #2. When you get that unloading issue, is the bot still waiting to land on a station? or it is already in the station? #3. If belt is empty (no ore) it will take time but if you leave it for awhile it will know and will try to move to another belt. #4. With safe mining, bot is warping even if other ship is in your alliance? -- #1 sounds good currently iam trying to handle the issue by hand, sometimes it stucks cause I'am not always watching #2 at some point it was waiting to land on station and in a different situation it was already docked on station, for like 30-60seconds, undocked, warped to the belt, recognized that the cargo is full , warps back to station and makes the same thing over again #3 But the bot wont leave it on his own I guess? thats what I noticed so far and if he leaves the belt, he moves back to the station and warps straight to the same belt (in most cases the topbelt of the list) #4 Not tried so far, only with strangers (out of alliance players) |
|
|
|
Post by newbiex on Sept 11, 2020 16:31:39 GMT
Thanks for the feedback will try to put some changes base on your feedback. Few points here: #1. One of the main reason for the multiple ore lock is due to the screen colors. I need a better ways for that part - looking into this. #2. When you get that unloading issue, is the bot still waiting to land on a station? or it is already in the station? #3. If belt is empty (no ore) it will take time but if you leave it for awhile it will know and will try to move to another belt. #4. With safe mining, bot is warping even if other ship is in your alliance? -- #1 sounds good currently iam trying to handle the issue by hand, sometimes it stucks cause I'am not always watching #2 at some point it was waiting to land on station and in a different situation it was already docked on station, for like 30-60seconds, undocked, warped to the belt, recognized that the cargo is full , warps back to station and makes the same thing over again #3 But the bot wont leave it on his own I guess? thats what I noticed so far and if he leaves the belt, he moves back to the station and warps straight to the same belt (in most cases the topbelt of the list) #4 Not tried so far, only with strangers (out of alliance players) Can you move/position the stop and start button to the bottom left corner - shouldn't be the issue but just want to be sure. Also, do you have access to Corps hanger? Please minimize that as well. Is the unloading always an issue or happening intermittently? |
|
|
|
Post by dakhun12 on Sept 11, 2020 16:34:42 GMT
Corps hangar is not in near
Will try to move the stop/start button and watch it again, will report if I see a difference!
The issue just appears random and seems to appear more on lowsec, when he warps out of a belt when an enemy is in near to a station and back to a belt
|
|
|
|
Post by dakhun12 on Sept 12, 2020 7:12:45 GMT
Another thing I noticed, so far I don't know why it started
Sitting in a lowsec belt - locked a target, is in near, starts to mine and randomly starts to unlock it and trys to mine again, looks like the bot is losing the information, that he is already mining on a target, cause the message shows, that he wants to lock the target, but actually unlocks it cause of it
|
|
|
|
Post by dakhun12 on Sept 12, 2020 12:11:14 GMT
Just btw. is it okay for you, that I report the stuff I notice? And thx for your awesome work overall so far Running the whole thing now for around 36h with breaks ofcourse : Review of higsec - minining everything without priority: Works reaaaaallly!!! smooth, just sometimes it start to do some random shit with the wrong asteroids and approches the wrong ones and needs a bit support to get back into the game, but overall, works really decent Just the random belt would be a huge improvement, cause there are some peps outthere, who likes to block the belt respawn by AFK on an empty belt I noticed that he starts doing random stuff when an ore disappears, he checks for active miners - starts to lock a new target if just 1/2 of 2/3 miners are running, approaches the new target and I guess that the point where he starts to struggle with the distance thing / approaching the wrong target - maybe the bot should lock an ore and approaches it by the target instead of by the list? And one more thing in lowsec: I've noticed that he starts to strugle, as soon as he needs to scroll around in the list cause of priority mining I've used to bot a toon on Dark Ochre, nearly without any trouble for ~6hours right now, tried to change it to Spodumain. He warps into the belt, scrolls the list, approches the asteroid and tries to lock it but is just approaching it over and over again, if he gets it locked and starts to mine, he sometimes reports "reaproche ore...." approaches the asteroid, unlocks it and starts the doing nearly nothing until he warps back to the station and tries it again |
|
|
|
Post by newbiex on Sept 12, 2020 16:15:16 GMT
Just btw. is it okay for you, that I report the stuff I notice? And thx for your awesome work overall so far Running the whole thing now for around 36h with breaks ofcourse : Review of higsec - minining everything without priority: Works reaaaaallly!!! smooth, just sometimes it start to do some random shit with the wrong asteroids and approches the wrong ones and needs a bit support to get back into the game, but overall, works really decent Just the random belt would be a huge improvement, cause there are some peps outthere, who likes to block the belt respawn by AFK on an empty belt I noticed that he starts doing random stuff when an ore disappears, he checks for active miners - starts to lock a new target if just 1/2 of 2/3 miners are running, approaches the new target and I guess that the point where he starts to struggle with the distance thing / approaching the wrong target - maybe the bot should lock an ore and approaches it by the target instead of by the list? And one more thing in lowsec: I've noticed that he starts to strugle, as soon as he needs to scroll around in the list cause of priority mining I've used to bot a toon on Dark Ochre, nearly without any trouble for ~6hours right now, tried to change it to Spodumain. He warps into the belt, scrolls the list, approches the asteroid and tries to lock it but is just approaching it over and over again, if he gets it locked and starts to mine, he sometimes reports "reaproche ore...." approaches the asteroid, unlocks it and starts the doing nearly nothing until he warps back to the station and tries it again Thanks. Just report any issue you have and will try to fix those things. Re-coded the locking and approaching of ore - so most of the issues should be fixed with the new version v3.3. This should fixed the following: - multiple locking of ores - Kissing the ore (0km distance) - Random unlocking of ore - Enabling/disabling of miner. - it will maintain distance with the ore around (8km to 15km) depending on the orbit setup Random belt also added. Added another option to apply ore priority on the current asteroid belt before moving to another one. Fixed the looping on landing and unloading of ore. I hope it is really fixed - few hours of botting and didn't get the issue. I need to add code for fleet invite. I'm not sure if the bot should accept the fleet invite but then the bot might end up not knowing what to do on some scenarios. I will try to upload a new version - just fixing another bug. |
|
|
|
Post by darenwest on Sept 13, 2020 9:02:27 GMT
Nice to hear. do you have any ETA when you will upload the 3.3 Version?
|
|
|
|
Post by 2cents on Sept 13, 2020 9:14:14 GMT
I got a stupid question, i'm a newbie and no idea how it works.
i installed Nox
downloaded the file so what should i do next?
|
|
|
|
Post by dakhun12 on Sept 13, 2020 10:43:50 GMT
Install Nox + Ankulua Pro2 + Eve + BOT Script
Start Ankulua Pro2 - Start Device , choose the script , Start eve - press play on ankulua, enjoy
|
|
|
|
Post by newbiex on Sept 13, 2020 14:40:17 GMT
Uploaded version 3.3 (13Sep2020)
|
|
|
|
Post by respatijakapermana on Sept 13, 2020 15:53:49 GMT
I dont understand how to instal daemon on nox player, im instal nox on data D, it will make instal daemon error ?
|
|
|
|
Post by newbiex on Sept 13, 2020 16:22:07 GMT
I dont understand how to instal daemon on nox player, im instal nox on data D, it will make instal daemon error ? You don't have to you can just enable root in Nox - since Eve Echoes still allows root. If in any case you really want to install the Daemon - see the link below. ankulua.boards.net/thread/3/daemon-installation |
|
|
|
Post by darenwest on Sept 13, 2020 16:45:01 GMT
Thx newbiex for new version 3.3
I will give it a go and testing it. thx
|
|
