|
|
Post by andalas on Nov 21, 2020 15:25:44 GMT
Hi, I just found out that my ssd write around 35tb in 2 months. After checking when running ankulua it does around 80mb/s write to disk. I think this is very bad for people that using SSD. My 1tb ssd is only rated for 640 TBW so if it's using 35 TBW in 2 months, it will only last 2 years. Right now I move my bluestacks from ssd to normal hdd. Is it possible to improve this? I don't know when running on handphone will it write 80mb/s BTW I'm using snapAndPlay People can use www.nirsoft.net/utils/disk_counters_view.htmlto check their write usage A normal office user writes approximately between 10 and 35 GB on a normal day. Even if one raises this amount up to 40 GB, it means that you would have to write for more than 5 years until the 70 TBW limit was reached. Thanks, Richard |
|
ATG
Junior Member
Posts: 79
|
Post by ATG on Nov 21, 2020 23:40:05 GMT
ok. I was curious so I tested it on my machine. nothing running except LDplayer with ankulua is started.
I got 2 hard disk. OS runs on C: drive , while LDplayer emulator runs on F: drive.
Here are the results with emulator running. I provide results of 2 hard drive because I do not know whether when ldplayer emulator is running also affect the C drive or not?
C: drive - Maximum write speed -0.43MB/Sec
C: drive - Avg write speed - between 0.06 ~ 0.43 MB/Sec (most of the time at the lower write seed)
F: drive - Maximum write speed -0.03MB/Sec
F: drive - Avg write speed - 0.01MB/Sec
As you can see with my results, I am no where near to write 80MB/Sec to disk compared to you.
You may want to try other emulator such as LDplayer with ankulua running to see whether it is the same issue for you which writing at 80MB/sec?
|
|
|
|
Post by andalas on Nov 22, 2020 10:27:57 GMT
Hi,
thank you for testing in ldplayer.
i just tried on ldplayer and it is writing around 45-50 mb/s on my machine
when i turn ankulua off, writing below 1 kb/s
but i found a solution, on setting if the screenshot option is media projection (only writing below 1kb/s)
i guess the problem is when using "daemon" to do a screenshot.
this is on ldplayer.
@atg -- are you using daemon or media projection?
i can't use bluestacks to do screenshot using media projection.
|
|
ATG
Junior Member
Posts: 79
|
Post by ATG on Nov 22, 2020 18:17:30 GMT
@atg -- are you using daemon or media projection? I am using media projection.
This method runs more faster than daemon esp on clicking. |
|
fryka
New Member
Posts: 2
|
Post by fryka on Jan 20, 2021 7:46:50 GMT
but i found a solution, on setting if the screenshot option is media projection (only writing below 1kb/s) i guess the problem is when using "daemon" to do a screenshot. this is on ldplayer. I have noticed the same problem with high 60-80MB/s write when using daemon. As I need emulator with Android 4.x.x Media projection method is not available. Using root method is not a solution, as it works slower and unstable. I am using Memu player. Would like to use LD player, but, as I wrote above, I need old Android 4.x.x, so LD is not an option. |
|
ATG
Junior Member
Posts: 79
|
Post by ATG on Jan 20, 2021 21:02:09 GMT
.... i can't use bluestacks to do screenshot using media projection.
You may want to try bluestack now. It is working fine when using media projection. the current version i am using is 4.24.30.1002
|
|
ATG
Junior Member
Posts: 79
|
Post by ATG on Jan 20, 2021 21:05:52 GMT
but i found a solution, on setting if the screenshot option is media projection (only writing below 1kb/s) i guess the problem is when using "daemon" to do a screenshot. this is on ldplayer. I have noticed the same problem with high 60-80MB/s write when using daemon. As I need emulator with Android 4.x.x Media projection method is not available. Using root method is not a solution, as it works slower and unstable. I am using Memu player. Would like to use LD player, but, as I wrote above, I need old Android 4.x.x, so LD is not an option. why the limitation? are you using someone's script? Daemon and root never works for me, sometime it cause subtle different script results.. |
|
fryka
New Member
Posts: 2
|
Post by fryka on Jan 28, 2021 6:36:14 GMT
I have noticed the same problem with high 60-80MB/s write when using daemon. As I need emulator with Android 4.x.x Media projection method is not available. Using root method is not a solution, as it works slower and unstable. I am using Memu player. Would like to use LD player, but, as I wrote above, I need old Android 4.x.x, so LD is not an option. why the limitation? are you using someone's script? Daemon and root never works for me, sometime it cause subtle different script results.. It is application dependent limitation. I am using script on application, which works in Nox, Memu, Mumu and older versions of BS emulators on only Android 4.x.x versions. On Android 5 and higher application crashes - maybe it detects, that I am using emulator. As I did not manage how to run it on higher Android versions, I am stuck with root/daemon method. |
|
