|
|
Post by gsxrk6 on Sept 5, 2021 2:19:12 GMT
Just got my first cube in 40 runs with this. Runs well on LDPlayer, wish I could figure out how to run it with BS5
|
|
zee
Contributors 
Posts: 47
|
Post by zee on Sept 5, 2021 5:33:28 GMT
Just got my first cube in 40 runs with this. Runs well on LDPlayer, wish I could figure out how to run it with BS5 Enable USB debugging Install Daemon Open Ankulua, select Daemon for Touch and Media projection. (and you need to install Daemon every time you restart BS)
|
|
|
|
Post by jfwoqnn on Sept 5, 2021 8:42:39 GMT
It can't refill stam after the newly added event stam pot.
I am using the latest version as of now.
It gets stuck on the refil page (showing gem and pots), but doesn't scroll down and choose the pots.
Please help.
|
|
|
|
Post by gemeaux on Sept 5, 2021 14:00:46 GMT
Works for me, are you sure you are using the latest version?
|
|
|
|
Post by jfwoqnn on Sept 5, 2021 16:20:31 GMT
Works for me, are you sure you are using the latest version? OK I managed to fix it. Apparently you have to "select script" again to manually choose the new script. I was just replacing the folder which didn't actually update it. |
|
jadr
New Member
Posts: 1
|
Post by jadr on Sept 6, 2021 1:55:44 GMT
How can i run it on Poco x3 pro phone?
|
|
zee
Contributors
Posts: 47
|
Post by zee on Sept 6, 2021 9:53:33 GMT
How can i run it on Poco x3 pro phone? no, doesn't support this device resolution. |
|
rr58
New Member
Posts: 12
|
Post by rr58 on Sept 6, 2021 11:23:32 GMT
For those that want to use it on bluestacks without installing daemon tools everytime, just go to your bluestack config file using notepad, switch values from bst.feature.rooting from 0 to 1, and the nougat enable root access to 1 as well.
Make sure you switch the file after to read only so when you open bluestacks it doesn't switch back.
|
|
|
|
Post by gsxrk6 on Sept 6, 2021 15:52:28 GMT
For those that want to use it on bluestacks without installing daemon tools everytime, just go to your bluestack config file using notepad, switch values from bst.feature.rooting from 0 to 1, and the nougat enable root access to 1 as well. Make sure you switch the file after to read only so when you open bluestacks it doesn't switch back. Still a no go on BS for me. Still freezes |
|
sigg
New Member
Posts: 2
|
Post by sigg on Sept 6, 2021 20:03:05 GMT
Hi man! Thanks alot for this script, and for maintaining it! Got a few drops before the last revision now so know it did work with my setup (LD 64). However, since the last update of the script, i have run into a massive drought. I know this can happen, but i havent seen anything like this yet (i already finished EX gayle fully legit and kept track), closing in on 600 resets without drop. It makes me a bit afraid the script does not recognize it as it should? I do see the red square. If you do see the red square and the script can exit the stage normally when there is no purple drop => it runs normally. It happened to me once around 600 runs no drop too. Then 2 purple drops within 20 runs (unfortunately no cube, 2 skill up instead)
Thanks man. Yea I just ran into a massive drought. And now another, closing in on 0/800 xD gdi. |
|
zee
Contributors
Posts: 47
|
Post by zee on Sept 7, 2021 3:11:02 GMT
For those that want to use it on bluestacks without installing daemon tools everytime, just go to your bluestack config file using notepad, switch values from bst.feature.rooting from 0 to 1, and the nougat enable root access to 1 as well. Make sure you switch the file after to read only so when you open bluestacks it doesn't switch back. Still a no go on BS for me. Still freezes Remember to go to Ankulua settings and select Daemon or Root for Media projection and Touch. |
|
rr58
New Member
Posts: 12
|
Post by rr58 on Sept 7, 2021 9:20:21 GMT
Thanks man. Yea I just ran into a massive drought. And now another, closing in on 0/800 xD gdi. Same lol, i'm at least over 600 without any purple atm. |
|
|
|
Post by lilnier on Sept 8, 2021 1:31:57 GMT
Is it possible to make script for dungeon 2 (officer) ? Well in wave 3 it should select boss and after it is done killing the boss it repeats the level.
|
|
|
|
Post by gemeaux on Sept 8, 2021 7:47:29 GMT
Hi Zee, just want to check if the script needs an update since new event potions were added
|
|
rr58
New Member
Posts: 12
|
Post by rr58 on Sept 8, 2021 9:23:26 GMT
Script broke unfortunately, just uses 1 small pot instead of the usual.
I hate making requests, but if it's not too much trouble to make the script use 15 small stm intead of the usual, it would be a nice increase to the speed of the grind and an upgrade to the script.
Ty for always updating it.
|
|
