|
Post by AnkuLua on Nov 25, 2017 0:14:25 GMT
When unzipping, please keep the file structure. Make sure there is directories tools and daemon.
Or share the computer screenshot.
|
|
|
Post by love2end on Nov 27, 2017 3:04:12 GMT
I'm using nox 6.0 , two emulators the daemon yesterday work fine but to day it only fine one of them i don't know why
|
|
|
Post by penman2 on Nov 27, 2017 5:32:44 GMT
Daemon gets installed on my first Nox instance but for new emulators that I create it gives me the no device detected message below. i.imgur.com/rsruf6X.png
|
|
|
Post by AnkuLua on Nov 27, 2017 6:14:13 GMT
You should enable the developer mode for all instances. Then install daemon again and choose the suitable device.
|
|
|
Post by love2end on Nov 27, 2017 7:46:19 GMT
i have did developer mode but still the same
|
|
|
Post by penman2 on Nov 27, 2017 8:30:58 GMT
You should enable the developer mode for all instances. Then install daemon again and choose the suitable device. The funny thing is my first instance does not have developer/usb debugging enabled and that's the one that works. I tried with and without usb debugging enabled for the new ones but no luck.
|
|
|
Post by AnkuLua on Nov 27, 2017 9:02:54 GMT
It's strange. We can see following message when running two nox instances
Detect more than one Android device (including simulator) 1: 127.0.0.1:62001 device 2: 127.0.0.1:62025 device Please input the device number to install:
Maybe you can try reboot your PC.
|
|
|
Post by love2end on Nov 27, 2017 13:45:22 GMT
It's strange. We can see following message when running two nox instances Detect more than one Android device (including simulator) 1: 127.0.0.1:62001 device 2: 127.0.0.1:62025 device Please input the device number to install: Maybe you can try reboot your PC. yesterday was give me 2 device but to day i don't know
|
|
|
Post by AnkuLua on Nov 27, 2017 16:02:47 GMT
If there is no device option, there is only one device found.
|
|
|
Post by love2end on Nov 27, 2017 19:17:07 GMT
so how to solve this problem?
|
|
|
Post by penman2 on Nov 27, 2017 19:34:36 GMT
Does nox.install.luac file scan for all devices connected to 127.0.0.1:62xxx? The message makes it seem like it's only checking if 127.0.0.1:62001 is connected. Is the luac file you tried with updated from the one in the first post?
|
|
|
Post by AnkuLua on Nov 28, 2017 0:56:25 GMT
|
|
|
Post by love2end on Nov 28, 2017 18:16:23 GMT
Does nox.install.luac file scan for all devices connected to 127.0.0.1:62xxx? The message makes it seem like it's only checking if 127.0.0.1:62001 is connected. Is the luac file you tried with updated from the one in the first post? i have tested with old and new it the same
|
|
|
Post by penman2 on Nov 28, 2017 20:00:01 GMT
Second device is 127.0.0.1:62026. I checked using nox_adb.exe in nox folder and it says the two are connected. I used Android Studio and it says the two are connected. But when I run nox_player.run, it only installs on 127.0.0.1:62001. i.imgur.com/GJA46uZ.png
|
|
|
Post by love2end on Nov 28, 2017 20:52:57 GMT
Second device is 127.0.0.1:62026. I checked using nox_adb.exe in nox folder and it says the two are connected. I used Android Studio and it says the two are connected. But when I run nox_player.run, it only installs on 127.0.0.1:62001. i.imgur.com/GJA46uZ.pngyea the same here the problem is with run nox_player, i even tried with an opening only nox2 and close nox1, it seem he only find the first one and check port 62001
|
|