Ian
New Member
Posts: 5
|
Post by Ian on Jun 27, 2018 14:48:06 GMT
Sorry. You can't disable debug/developer mode for Android 8.0 and above. So it's currently impossible to turn off usb debugging on 8.0 and still have the daemon running? Is this something that can/will be fixed soon or do I need to look into downgrading my phone? The app I use AnkuLua for will not run if usb debugging in on.
|
|
|
Post by AnkuLua on Jun 27, 2018 15:09:48 GMT
Sorry. You can't disable debug/developer mode for Android 8.0 and above. So it's currently impossible to turn off usb debugging on 8.0 and still have the daemon running? Is this something that can/will be fixed soon or do I need to look into downgrading my phone? The app I use AnkuLua for will not run if usb debugging in on. In that case, downgrading is the only option.
|
|
Ian
New Member
Posts: 5
|
Post by Ian on Jun 27, 2018 16:08:00 GMT
So it's currently impossible to turn off usb debugging on 8.0 and still have the daemon running? Is this something that can/will be fixed soon or do I need to look into downgrading my phone? The app I use AnkuLua for will not run if usb debugging in on. In that case, downgrading is the only option. Is it permanently the only option or will a future update fix this problem?
|
|
|
Post by AnkuLua on Jun 27, 2018 16:15:09 GMT
In that case, downgrading is the only option. Is it permanently the only option or will a future update fix this problem? It's because the Android system behavior change. Don't see any chance to fix it.
|
|
|
Post by Dmitry on Jul 7, 2018 21:33:35 GMT
Thanks for advice to disable root, it helps to save active daemon settings. Daemon method is really better then root.
One more question - is it possible to close console window after daemon installation? I use memu.run.bat and it hangs on "Daemon installation complete.Please close this windows." I think its hardcoded in install.luac. Can "this window" be closed automatically after installation finished or failed?
I use emulator and want to restart VM (I've done something like watchdog via tasker and cmd-script). Also I scripted in Lua series of killApp() + startApp() and often app hangs or crash on start after kill. Don't know reason... But I can detect it and rebooot the whole VM.
The problem is in daemon installation. Ok, now I just wait 15 sec and check if script started. But it would be better to wait memu.run.bat to finish and check its errorlevel. Thanks.
P.S. If app hangs in black screen after startApp() -> AnkuLua becomes very slow. So I can't just call startApp() again (I tried this first) -> only reboot helps.
|
|
|
Post by AnkuLua on Jul 7, 2018 23:21:53 GMT
1. For some forgotten reasons, windows can't be closed automatically.
2. So, the flow is killing VM -> start VM -> install daemon -> start AnkuLua -> Run the game -> run the script What's your problem and suggestion?
|
|
|
Post by Dmitry on Jul 8, 2018 4:29:14 GMT
My problem was app hang-up on startApp(). I've solved it by workaround with watchdog and restarting VM. Now it works. This method may be usefull for anyone else.
And there are some minor issues with daemon installation: - new unused console window stay on screen after every cycle of rebooting - the end of daemon installation can't be detected directly.
|
|
acid1
New Member
Posts: 41
|
Post by acid1 on Jul 9, 2018 1:00:35 GMT
who on vivo phone ? any idea how to install daemon on vivo phone ? already enable usb debugg, already install adb driver/usb driver on pc. but when run daemon setup it's said : Version: 1.7.1 Daemon installation Connecting device... * daemon not running. starting it now on port 5037 * * daemon started successfully * List of devices attached There is no device detected. Please make sure the USB driver installed and device connected to PC.
|
|
|
Post by Dmitry on Jul 9, 2018 7:50:37 GMT
My problem was app hang-up on startApp(). I've solved it by workaround with watchdog and restarting VM. Now it works. This method may be usefull for anyone else. And there are some minor issues with daemon installation: - new unused console window stay on screen after every cycle of rebooting - the end of daemon installation can't be detected directly.
Simple solution for console window autoclose (memu.run.bat) @echo of .\tools\lua5.1.exe .\tools\install.luac --adb=memu_adb rem set /p temp="" taskkill /f /im memu_adb.exe > nul
|
|
|
Post by domingo on Jul 11, 2018 11:55:14 GMT
Hallo guys!!! I have a huge problem with daemon. I bought A NEW HP Laptop ( HP - ca0203ng Notebook) AMD Ryzen 3, Radeon..Windows 10 64 bit) it was not that cheap (almost 500 dollar) for farming sw, installed everything , nox, ankulua but cant run daemon properly. The last version of daemon cant find running nox on my notebook. Can you help me pls? Here are the pictures. ( I ran run.bat, nox player bat and others , nothing works) ibb.co/jKuDnTibb.co/mg5Eu8ibb.co/isCxgoPS; Interesting fakt that it finds my mobile phone, but not the open and running NOX App player...
|
|
|
Post by AnkuLua on Jul 11, 2018 12:42:02 GMT
Hallo guys!!! I have a huge problem with daemon. I bought A NEW HP Laptop ( HP - ca0203ng Notebook) AMD Ryzen 3, Radeon..Windows 10 64 bit) it was not that cheap (almost 500 dollar) for farming sw, installed everything , nox, ankulua but cant run daemon properly. The last version of daemon cant find running nox on my notebook. Can you help me pls? Here are the pictures. ( I ran run.bat, nox player bat and others , nothing works) ibb.co/jKuDnTibb.co/mg5Eu8ibb.co/isCxgoPS; Interesting fakt that it finds my mobile phone, but not the open and running NOX App player... Try this ankulua.boards.net/thread/3/daemon-installation#nox
|
|
|
Post by domingo on Jul 11, 2018 13:47:40 GMT
Hallo guys!!! I have a huge problem with daemon. I bought A NEW HP Laptop ( HP - ca0203ng Notebook) AMD Ryzen 3, Radeon..Windows 10 64 bit) it was not that cheap (almost 500 dollar) for farming sw, installed everything , nox, ankulua but cant run daemon properly. The last version of daemon cant find running nox on my notebook. Can you help me pls? Here are the pictures. ( I ran run.bat, nox player bat and others , nothing works) ibb.co/jKuDnTibb.co/mg5Eu8ibb.co/isCxgoPS; Interesting fakt that it finds my mobile phone, but not the open and running NOX App player... Try this ankulua.boards.net/thread/3/daemon-installation#noxOkay i modifid Nox app player bat, but it says now there are devices offline. How can i wake them up? ibb.co/bV4DMounable to connect to 127.0.0.1:62025:62025 unable to connect to 127.0.0.1:50991:50991 connected to 127.0.0.1:57001 already connected to 127.0.0.1:58001 already connected to 127.0.0.1:61001 unable to connect to 127.0.0.1:62030:62030 unable to connect to 127.0.0.1:62031:62031 unable to connect to 127.0.0.1:62032:62032 Version: 1.7.1 Daemon installation for Nox App Player Connecting device... connected to 127.0.0.1:5037 List of devices attached 127.0.0.1:26966 offline 127.0.0.1:58001 offline 127.0.0.1:61001 offline Offline devices are detected. If you want to install daemon on them, please wake them up. 127.0.0.1:26966 offline 127.0.0.1:58001 offline 127.0.0.1:61001 offline There is no device detected. Please make sure the USB driver installed and device connected to PC. Read more: ankulua.boards.net/thread/3/daemon-installation?page=18#ixzz5KxBF2ARm
|
|
|
Post by domingo on Jul 11, 2018 22:25:21 GMT
Any response? Otherwise i will not be able to use Ankulua + Other skrips guys..;(
|
|
|
Post by dragonscale15 on Jul 12, 2018 18:20:05 GMT
Any response? Otherwise i will not be able to use Ankulua + Other skrips guys..;( Use 1.5 Daemon instead of new 1,7 +. I had the same issue on mine.
|
|
|
Post by domingo on Jul 12, 2018 20:50:21 GMT
Thank you very much! Ive installed the oldest version of daemon and it worked!!!
|
|