angga
New Member
Posts: 3
|
Post by angga on Jul 17, 2018 2:47:36 GMT
The problem for this method is that the device need to be rooted. And you should run the command as root. Otherwise, the screenshot and click will not works. Although AnkuLua told you daemon found.  Can you please make a complete guide with screenshots and step by step installation of this method. Just this method is very useful when the phone is switched off or that it will reboot. I have Root but just one game that he Root eventually closed and the game says that the program uses prohibited. daemon saves the situation. But not all so smoothly even
[/quote] |
|
rom37
New Member
Posts: 9
|
Post by rom37 on Jul 18, 2018 8:55:40 GMT
Hello,
I try to install daemon on a Servo H1. I did enable developer options but when i launch run.bat, i have this error :
"There is no device detected.
Please make sure the USB driver installed and device connected to PC."
I don't find any usb driver for this phone, when i plug it to PC, the phone is well recognized and is charging.
Any ideas ?
Thanks a lot,
|
|
rom37
New Member
Posts: 9
|
Post by rom37 on Jul 19, 2018 15:50:06 GMT
To extend my previous question, is there a way to install daemon manualy directly on the phone ?
Best regards,
|
|
|
|
Post by AnkuLua on Jul 20, 2018 0:40:25 GMT
To extend my previous question, is there a way to install daemon manualy directly on the phone ? Best regards, No. This is the limitation of Android system. |
|
rom37
New Member
Posts: 9
|
Post by rom37 on Jul 20, 2018 4:54:11 GMT
To extend my previous question, is there a way to install daemon manualy directly on the phone ? Best regards, No. This is the limitation of Android system. Thanks for reply. Do i have to move my initial question to another location on the forum ? Hello, I try to install daemon on a Servo H1. I did enable developer options but when i launch run.bat, i have this error : "There is no device detected. Please make sure the USB driver installed and device connected to PC." I don't find any usb driver for this phone, when i plug it to PC, the phone is well recognized and is charging. Any ideas ? Thanks a lot, Read more: ankulua.boards.net/post/11526/quote/3?page=19#ixzz5LlcsHnFVI buy a cheap phone to run 24/24 a script but i just can't install daemon on it... sick  I try to install many drivers, none works. The phone est recognize by the computer but daemon or remoteAKL don't work on it. I tried MTP, PTP, charge only etc... always error. Thanks a lot ! Romain |
|
|
|
Post by shoebox321 on Jul 24, 2018 22:28:07 GMT
How high is the number for bluestacks in the install.bat file typically need to go? I started going up by 5's but when I got to 100 I started going up by 100 and im at 1500. It's recognizing 2 instances, but not the third.
|
|
|
|
Post by sjkjmjnj on Aug 10, 2018 18:58:15 GMT
Hi everyone. I have bought the lifetime license of Ankulua PRO 2 and I didn't have any problems on Samsung Galaxy S7 without root. I have been able to install everything as described and run my scripts for Summoners War. I have problems with my new device while trying to install daemon. My new device is Lenovo VIBE K5 Note running Android 6.0.1. When I run run.bat I get the error "There is no device detected." See the picture below. I have installed the USB driver and I am able to see my device from device manager and I have transfered many files from the computer to the phone recently. I have read the whole thread, but nothing suggested helped. Tried MTP and PTP without success. USB debugging is enabled. Please help.  |
|
|
|
Post by AnkuLua on Aug 10, 2018 23:50:33 GMT
Hi everyone. I have bought the lifetime license of Ankulua PRO 2 and I didn't have any problems on Samsung Galaxy S7 without root. I have been able to install everything as described and run my scripts for Summoners War. I have problems with my new device while trying to install daemon. My new device is Lenovo VIBE K5 Note running Android 6.0.1. When I run run.bat I get the error "There is no device detected." See the picture below. I have installed the USB driver and I am able to see my device from device manager and I have transfered many files from the computer to the phone recently. I have read the whole thread, but nothing suggested helped. Tried MTP and PTP without success. USB debugging is enabled. Please help. Make sure that "Allow USB debugging" dialog happened at least once on your phone. |
|
|
|
Post by sjkjmjnj on Aug 11, 2018 12:05:38 GMT
Yeah, I have tried to reset the settings and forget previously connected pc's from the phone settings. But that didn't help. That usb debugging window never appeared as it did on the screen of my samsung device and don't know how to make it work. Any other ideas ?
|
|
|
|
Post by joseltr on Sept 2, 2018 16:30:46 GMT
sir, how can i run daemon with KOPlayer multi instance?
|
|
|
|
Post by AnkuLua on Sept 2, 2018 23:18:30 GMT
|
|
|
|
Post by joseltr on Sept 3, 2018 8:10:58 GMT
@echo off
.\tools\nox_adb.exe connect 127.0.0.1:60001
.\tools\nox_adb.exe connect 127.0.0.1:64027
.\tools\nox_adb.exe connect 127.0.0.1:63026
.\tools\nox_adb.exe connect 127.0.0.1:62025
.\tools\nox_adb.exe connect 127.0.0.1:61024
.\tools\nox_adb.exe connect 127.0.0.1:58030
so what would i replace for "nox_adb.exe"  |
|
gahah
New Member
Posts: 3
|
Post by gahah on Sept 19, 2018 19:14:15 GMT
Very good
|
|
royal
New Member
Posts: 3
|
Post by royal on Sept 29, 2018 20:24:56 GMT
I was updated my Zenfone 3 Max to android 8, then Daemon is not working anymore. I already test both methods for android 8, with method 1 adb dont find device, and with second method this happens:  Any solution? I already restore my phone with factory reset (still android 8, but cleaned), first action was testing daemon, and not work (picture above). |
|
royal
New Member
Posts: 3
|
Post by royal on Oct 3, 2018 19:41:07 GMT
No answer? No solution?
|
|
