|
Post by hyubrt on Jun 1, 2019 11:49:33 GMT
can anyone give me instruction on how to install daemon on bluestacks i just cant get it installed, thx
|
|
|
Post by AnkuLua on Jun 1, 2019 14:36:31 GMT
can anyone give me instruction on how to install daemon on bluestacks i just cant get it installed, thx BlueStacks: For installing daemon on BlueStacks 4.0, after BS start normally, go to settings preference enable ADB.
|
|
|
Post by touden on Jun 23, 2019 21:25:36 GMT
Hey guys I dont know what is happening, the Daemon is working only with USB cable connected... i tried to follow the step 2 running the run_tcpip but when I remove the cable to press any key to continues, it's giving a error message saying that the device wasnt found. Anyone already seen this before? Device - OnePlus 5
Edit: Just to share. The problem was solved making change in my internet router, I created a filter to enable a traffec with IP/Port informed in the run_tpcid.bat. Now its OK daemon runing out of cable.
|
|
|
Post by AnkuLua on Jun 23, 2019 22:03:20 GMT
Hey guys I dont know what is happening, the Daemon is working only with USB cable connected... i tried to follow the step 2 running the run_tcpip but when I remove the cable to press any key to continues, it's giving a error message saying that the device wasnt found. Anyone already seen this before? Device - OnePlus 5 You can use accessibility mode directly for real devices above Android 7.0
|
|
|
Post by touden on Jun 23, 2019 22:08:48 GMT
Hey guys I dont know what is happening, the Daemon is working only with USB cable connected... i tried to follow the step 2 running the run_tcpip but when I remove the cable to press any key to continues, it's giving a error message saying that the device wasnt found. Anyone already seen this before? Device - OnePlus 5 You can use accessibility mode directly for real devices above Android 7.0 The script does not work without daemon running, it shows me a mistake even in the accessibility mode.
|
|
|
Post by AnkuLua on Jun 23, 2019 22:32:04 GMT
You can use accessibility mode directly for real devices above Android 7.0 The script does not work without daemon running, it shows me a mistake even in the accessibility mode. How about solution 1? For solution 2, your PC and phone should connect to the same WiFi AP.
|
|
|
Post by touden on Jun 24, 2019 0:13:04 GMT
The script does not work without daemon running, it shows me a mistake even in the accessibility mode. How about solution 1? For solution 2, your PC and phone should connect to the same WiFi AP. The solution 1 give me an installation complete but the ankulua don't recognize.
|
|
|
Post by makethiseasierffs on Jul 16, 2019 3:54:20 GMT
How do I get it to work? I keep getting an error. Something about a connection error or something when installing the install.nox.luac and a long error when installing install.luac saying no files. I don't understand, I'm reading your directions and following it step by step and getting the error. I even deleted all Ankulua standard files and just extracted the daemon files and still nothing error. Maybe I'm just retarded, I don't know. Guide me please.
|
|
|
Post by AnkuLua on Jul 16, 2019 12:44:02 GMT
How do I get it to work? I keep getting an error. Something about a connection error or something when installing the install.nox.luac and a long error when installing install.luac saying no files. I don't understand, I'm reading your directions and following it step by step and getting the error. I even deleted all Ankulua standard files and just extracted the daemon files and still nothing error. Maybe I'm just retarded, I don't know. Guide me please. Did you install any phone sync software on Windows? If yes, please uninstall it. Or please share the installation screenshot.
|
|
|
Post by dmihawk on Aug 5, 2019 19:50:38 GMT
Any sugestion to execute daemon with linux?
|
|
|
Post by AnkuLua on Aug 5, 2019 23:27:17 GMT
Any sugestion to execute daemon with linux? Linux is not supported now.
|
|
|
Post by andeiih on Aug 7, 2019 0:15:22 GMT
I got ADB selected and latest version of BS. My device is rooted.
Still get the error: "Fail to copy /system/bin/ama_daemon
Please help <3
|
|
|
Post by AnkuLua on Aug 7, 2019 12:25:04 GMT
I got ADB selected and latest version of BS. My device is rooted. Still get the error: "Fail to copy /system/bin/ama_daemon Please help <3 BlueStacks: For installing daemon on BlueStacks 4.0, after BS start normally, go to settings preference enable ADB.
|
|
|
Post by gottkeks on Aug 8, 2019 19:14:37 GMT
Hello, i have the problem that i always have to reinstall deamon to nox when i restarted my pc but after the reinstall it works again until the next day cause i shut down my pc for the night , than ankulua asks me to install deamon again
Sorry for bad english
|
|
|
Post by AnkuLua on Aug 8, 2019 23:55:11 GMT
Hello, i have the problem that i always have to reinstall deamon to nox when i restarted my pc but after the reinstall it works again until the next day cause i shut down my pc for the night , than ankulua asks me to install deamon again Sorry for bad english Yes. It's required to reinstall daemon after reboot PC. You can just let PC sleep or hibernate. Or you can install boot daemon. ankulua.boards.net/thread/1148/install-boot-daemon
|
|