|
|
Post by paladiex on Sept 18, 2017 0:03:02 GMT
What am i supposed to run, I already runned immageupdater but nothing happend. At the rune management page run PalPowerUp.lua |
|
|
|
Post by zweihaander on Sept 19, 2017 12:41:06 GMT
Yo, from the updtate i'm having this issue : 
while the imageupdater doesnt exit anymore, i dont know what to do |
|
|
|
Post by paladiex on Sept 19, 2017 14:29:20 GMT
Yo, from the updtate i'm having this issue :
while the imageupdater doesnt exit anymore, i dont know what to do If you wait long enough the image updater will exit. It's about a 5-7 min wait on some devices. Worst case it will crash and you have to run it again. |
|
|
|
Post by zweihaander on Sept 20, 2017 7:54:15 GMT
But I cant wait because it stop by himself after 3 seconds.
|
|
|
|
Post by paladiex on Sept 20, 2017 19:53:36 GMT
But I cant wait because it stop by himself after 3 seconds. Does the play button dissappear after? Or do you get an error message? |
|
|
|
Post by zweihaander on Sept 21, 2017 9:07:52 GMT
WHen I press play, u'll get the error u can see above. The play button stays
|
|
|
|
Post by paladiex on Sept 21, 2017 13:47:57 GMT
WHen I press play, u'll get the error u can see above. The play button stays The error above is when you run PalPowerUp, before you run imageupdater.lua. What error do you get when you run imageupdater.lua. Sometimes it can take 5+ minutes to update the image library. It downloads many pictures. You must run imageupdater.lua all of the way through. |
|
|
|
Post by zweihaander on Sept 21, 2017 14:51:07 GMT
I see what I did wrong, because I have downloaded PalPowerUp rune, and it doesnt come with the imageupdater.lua .... So I just downloaded the PalBot and everything is ok  |
|
|
|
Post by paladiex on Sept 21, 2017 15:30:11 GMT
I see what I did wrong, because I have downloaded PalPowerUp rune, and it doesnt come with the imageupdater.lua .... So I just downloaded the PalBot and everything is ok My apologies, the Palbot image updater will not fix the issue. I've reuploaded the RAR with the imageupdater.lua included in the OP. Apparently I never noticed it was missing. Sorry! |
|
|
|
Post by zweihaander on Sept 22, 2017 7:49:08 GMT
I see what I did wrong, because I have downloaded PalPowerUp rune, and it doesnt come with the imageupdater.lua .... So I just downloaded the PalBot and everything is ok My apologies, the Palbot image updater will not fix the issue. I've reuploaded the RAR with the imageupdater.lua included in the OP. Apparently I never noticed it was missing. Sorry! NP, sometimes, an User can also be more... inteligent and stop seeing errors everywhere ^^ |
|
|
|
Post by shooterdude on Sept 24, 2017 20:17:56 GMT
Nice script!
A couple nice-to-haves:
- It'd be nice if it had separate rules for 1/3/5 slot runes vs 2/4/6. I'm likely to keep a 2 slot rune that has 1 flat stat.. but not a 1/3/5.
- It'd be nice if it checked the level of the rune first against it's rarity, and skipped the substat check if the rune was already at the appropriate level (especially if flat = 4).
|
|
|
|
Post by shooterdude on Sept 24, 2017 20:49:18 GMT
Since it's open source.. I edited the script a bit to tell me which rune it's on. "X runes left". Kinda nice when using this to go over 100+ runes.. just sharing the idea in case you want to repeat it |
|
|
|
Post by paladiex on Sept 25, 2017 2:00:58 GMT
Nice script! A couple nice-to-haves: - It'd be nice if it had separate rules for 1/3/5 slot runes vs 2/4/6. I'm likely to keep a 2 slot rune that has 1 flat stat.. but not a 1/3/5. - It'd be nice if it checked the level of the rune first against it's rarity, and skipped the substat check if the rune was already at the appropriate level (especially if flat = 4). I definitely plan on adding in these features. Im also working on a method that will detect what stat increased, then sell based on whether it rolled into flat 1 or more times. I can also add in your counter. I was planning on having the bot scan for +12,+9,+6 before it even clicks the dialog to do the upgrades. No need to click a +12. Ill see about making your suggested edits. If you beat me and wanna share, ill add it to the op  Im just having trouble finding time to make all the edits. Palbot has taken up nost of my time lately, and im working 50+ hour weeks at work. I'm gonna try to put in some effort while I am in china. |
|
|
|
Post by zweihaander on Nov 6, 2017 12:32:10 GMT
Yo ! How are you ?
I'm still using the Power Up RUne Script ! Works very well.
I have gtta a suggestion : the swcript should read before the level of the rune. Because if u want lvl up a couple of runes, u have to go trough all runes even thoses that are lvl 12...
|
|
|
|
Post by zweihaander on Dec 4, 2017 12:16:44 GMT
Nice script! A couple nice-to-haves: - It'd be nice if it had separate rules for 1/3/5 slot runes vs 2/4/6. I'm likely to keep a 2 slot rune that has 1 flat stat.. but not a 1/3/5. - It'd be nice if it checked the level of the rune first against it's rarity, and skipped the substat check if the rune was already at the appropriate level (especially if flat = 4). I definitely plan on adding in these features. Im also working on a method that will detect what stat increased, then sell based on whether it rolled into flat 1 or more times. I can also add in your counter. I was planning on having the bot scan for +12,+9,+6 before it even clicks the dialog to do the upgrades. No need to click a +12. Ill see about making your suggested edits. If you beat me and wanna share, ill add it to the op Im just having trouble finding time to make all the edits. Palbot has taken up nost of my time lately, and im working 50+ hour weeks at work. I'm gonna try to put in some effort while I am in china. Hello how are you ? Are u still working on this script ?  I'm having this issue on each rune now... |
|
