|
Post by mrfish on Dec 29, 2017 18:16:43 GMT
Ok, I might have screwed up here but I hope it's not the case....
I wrote a script that uses screen shots from Nox running on 480x800 screen size. The script runs great on Nox, however when I transfer it to an LG Aristo with a 720x1280 real screen size and 720x1187 usable screen size, nothing happens.
My settings are:
Settings:setScriptDimension(true, 480)
Settings:setCompareDimension(true, 480)
When I run the script on the LG Aristo, image matching does not work. I would assume that this is because of the difference in screen size of Nox vs the Aristo.
Did I screw up by developing my script and using images captured on a lower resolution setting than the device I was planning on using it on? Or might there be some other issue that is preventing the script from running properly on the android device? I get no errors, just that nothing happens at all when I use anything to do with image recognition.
If there's any information that I'm leaving out for the question to be answered, please let me know.
Thanks!
|
|
|
Post by Exilereven on Dec 29, 2017 19:05:38 GMT
I recommend making the original script as 1280x720 or 1920x1080 with 19:6 ratio. Its the most commonly used on the forums.
It is probably the wierd resolution.
If you were to redo in 1280x 720 it will work for a lot of people right out of the box. Then you can work on adjusting config settings for other different ratios/resolutions.
|
|
|
Post by mrfish on Dec 29, 2017 19:56:33 GMT
Ugh... gotta redo the pictures... oh well thats the way things go I'll give that a whirl and hopefully it'll pan out ok. Thanks for the input!
|
|