|
|
Post by 0racle on Sept 21, 2019 11:22:20 GMT
|
|
|
|
Post by 0racle on Sept 21, 2019 11:28:00 GMT
It is getting stuck trying to find fodder 3* without the lvl 20 selected. x.x Edit: fixed in v079 too. |
|
Fae
New Member
Posts: 3
|
Post by Fae on Sept 21, 2019 22:01:34 GMT
Btw, did you know that you can select the ALL tab instead of selecting the gear pages one by one to sell when equipment is full?  |
|
|
|
Post by 0racle on Sept 22, 2019 1:13:38 GMT
Btw, did you know that you can select the ALL tab instead of selecting the gear pages one by one to sell when equipment is full? Yeah, just noticed it recently. Will update it later  |
|
|
|
Post by song101 on Sept 22, 2019 4:20:56 GMT
Maybe someone can share their settings with me. I'm on a Xiaomi mi mix 2s (not emulator) and miui 10. Is rooted.
It says its 18:9 ratio 2160x1080. Minimum dpi 340. default is ~400. I can't go down any further. Have to choose media projection/root touch or it wont work vs root/root touch
My issue is that the script runs great until it reaches Stage Clear. Then its stuck. First the display says start search but then its stuck as in nothing on the screen responds to touch for a couple of minutes and either it resolves itself for a couple of runs and then does it again or I manually turn the screen off and on again.
It feels like it doesn't see the stage clear image some of the time?
|
|
|
|
Post by 0racle on Sept 22, 2019 4:42:28 GMT
Maybe someone can share their settings with me. I'm on a Xiaomi mi mix 2s (not emulator) and miui 10. Is rooted. It says its 18:9 ratio 2160x1080. Minimum dpi 340. default is ~400. I can't go down any further. Have to choose media projection/root touch or it wont work vs root/root touch My issue is that the script runs great until it reaches Stage Clear. Then its stuck. First the display says start search but then its stuck as in nothing on the screen responds to touch for a couple of minutes and either it resolves itself for a couple of runs and then does it again or I manually turn the screen off and on again. It feels like it doesn't see the stage clear image some of the time? Please install Daemon and try again to see if it works? ankulua.boards.net/thread/3/daemon-installationEdit: oh your device is rooted so Daemon is not needed. Please also disable Accessibility mode in your device settings. Then try to start the script at "Start" screen to see if it can enter the battle? Or try Arena function to see if it works? |
|
|
|
Post by song101 on Sept 22, 2019 17:59:31 GMT
Maybe someone can share their settings with me. I'm on a Xiaomi mi mix 2s (not emulator) and miui 10. Is rooted. It says its 18:9 ratio 2160x1080. Minimum dpi 340. default is ~400. I can't go down any further. Have to choose media projection/root touch or it wont work vs root/root touch My issue is that the script runs great until it reaches Stage Clear. Then its stuck. First the display says start search but then its stuck as in nothing on the screen responds to touch for a couple of minutes and either it resolves itself for a couple of runs and then does it again or I manually turn the screen off and on again. It feels like it doesn't see the stage clear image some of the time? Please install Daemon and try again to see if it works? ankulua.boards.net/thread/3/daemon-installationEdit: oh your device is rooted so Daemon is not needed. Please also disable Accessibility mode in your device settings. Then try to start the script at "Start" screen to see if it can enter the battle? Or try Arena function to see if it works? Accessibility is off. Like I said said it "Starts" the battle just fine, it can enter the battle just fine but its the Stage Clear screen that it has issues at as i described above. I tried pvp arena function. It does the exact same thing as the Stage Clear screen. NPC arena works fine. |
|
|
|
Post by yuki7776 on Sept 22, 2019 22:18:32 GMT
0racle Hi again want to ask if it possible to make this Feature here prnt.sc/p9k7v0make 2 option to the script stop when friendship level 3 and friendship level 6 ? prnt.sc/p9k4yxthank you again for your hard work
|
|
|
|
Post by 0racle on Sept 23, 2019 3:24:26 GMT
Please install Daemon and try again to see if it works? ankulua.boards.net/thread/3/daemon-installationEdit: oh your device is rooted so Daemon is not needed. Please also disable Accessibility mode in your device settings. Then try to start the script at "Start" screen to see if it can enter the battle? Or try Arena function to see if it works? Accessibility is off. Like I said said it "Starts" the battle just fine, it can enter the battle just fine but its the Stage Clear screen that it has issues at as i described above. I tried pvp arena function. It does the exact same thing as the Stage Clear screen. NPC arena works fine. What is your device resolution? |
|
|
|
Post by 0racle on Sept 23, 2019 3:27:03 GMT
0racle Hi again want to ask if it possible to make this Feature here prnt.sc/p9k7v0make 2 option to the script stop when friendship level 3 and friendship level 6 ? prnt.sc/p9k4yxthank you again for your hard work OK will check |
|
|
|
Post by song101 on Sept 23, 2019 23:17:34 GMT
Accessibility is off. Like I said said it "Starts" the battle just fine, it can enter the battle just fine but its the Stage Clear screen that it has issues at as i described above. I tried pvp arena function. It does the exact same thing as the Stage Clear screen. NPC arena works fine. What is your device resolution? It says its 18:9 ratio 2160x1080. |
|
|
|
Post by lightz on Sept 24, 2019 7:11:27 GMT
Hello,
Thank you for your script!
the new shop refresh feature has some minor concerns about the screen resolution in 2160 x 1080 (mi mix 2s)
to scroll to the last item at the bottom of the list, a click is made on the image of the 3rd item.
thank you:)
|
|
|
|
Post by 0racle on Sept 24, 2019 17:23:27 GMT
Will check. Sorry I was busy
|
|
|
|
Post by ruki01 on Sept 24, 2019 18:16:40 GMT
I can't seem to get the adventure walkthrough to work. Is there anything you were supposed to do to set it up?
|
|
|
|
Post by Sunwei on Sept 25, 2019 0:07:39 GMT
So, just got the script about a day ago, and have been using it pretty well. Works good most of the time but others it just gets stuck for seemingly no reason. I checked the posts on this thread and it looks like other people are having similar problems.
The thing is that it's stopping on the "Stage Clear" screen because of the fact that during the time that the script is reading the "Stage Clear" screen, it's actually overlaid by *anything that drops from the boss*.
The boss doesn't always drop items, but when it drops something like a piece of gear, it actually ends up covering up the stage clear image, which is what the script uses to identify a cleared run and thus causes the script to not recognize the run as being completed. This is why the script will repeatedly say "Run: X - Win Rate X/X" with X being the number of runs completed like when running stages normally. This means that it is nearly entirely RNG whether or not the script gets stuck like this. I've tried several different options, but none of them seem to help bypass this issue. I came to this conclusion when I was actually sitting there and watching the runs go on because I was trying to figure out what was wrong. It's been very consistently dropping the win identification every single time the boss or last enemy drops something that appears at the top. In fact, it has been literally every single time the boss dropped a piece of gear or something that forced a notification at the top that the run wasn't being recognized.
Basically, the script needs to read for "Stage Clear" later. It may overall increase the amount of time it takes per-win but it greatly increases efficiency. Delaying the time when the script reads for "Stage Clear", or making the script read for "Stage Clear" multiple times would most likely fix this issue.
|
|
