Post by AnkuLua on Oct 15, 2015 14:25:07 GMT
Solve Media Project screenshot unstable problem
According to this discussion, there is change that Media Projection Service may cause internal exception on some devices.
In version 3.1.0, MediaProject will be restarted if screenshot not available in a limited time.
New Method
setContinueClickTiming(downMs, intervalMs)
int downMs: click down milliseconds
int intervalMs: interval milliseconds between clicks
Note: There is some overhead for each command. And the overhead is from device to device.
Therefore, if really caring the timing, you should try it in your device.
According to this discussion, there is change that Media Projection Service may cause internal exception on some devices.
In version 3.1.0, MediaProject will be restarted if screenshot not available in a limited time.
New Method
setContinueClickTiming(downMs, intervalMs)
int downMs: click down milliseconds
int intervalMs: interval milliseconds between clicks
Note: There is some overhead for each command. And the overhead is from device to device.
Therefore, if really caring the timing, you should try it in your device.
setContinueClickTiming(50, 50)
loc = Location(270, 320)
t = Timer()
continueClick(loc, 200)
duration = t:set()
print(duration)
