|
|
Post by doohie on Mar 25, 2017 16:44:38 GMT
Hi, im just trying to do the simplest of macros, tap in to 2 different locations at the same time, or as close as possible to the same time. Basically (aside the settings) the script is 2 clicks:
click(x1,y1)
click(x2,y2)
lines but there is always a small delay between each. Is there a way to remove this?
|
|
|
|
Post by theycallmek on Mar 25, 2017 17:02:21 GMT
You might be able to get the job done with zoom()ankulua.boards.net/thread/13/advanced-methods#zoomthats the only method i know of for touching 2 points of the screen at the same time. Just set the distance it "drags" super low. the format is: zoom(pt1StartX, pt1StartY, pt1EndX, pt1EndY, pt2StartX, pt2StartY, pt2EndX, pt2EndY, step)so for a 1280x720 display it might look something like: zoom(400, 200, 401, 201, 800, 1000, 801, 1001, 1)that would tap right around 400px x 800px and also click around 800px x 1000px at the same time, I think. I haven't actually tested the code, but in theory it should work. Let me know how it goes! |
|
|
|
Post by doohie on Mar 25, 2017 17:23:44 GMT
Thank you for the quick reply. I actually need it to register as 2 different taps so zoom doesn't work for me but the one below it continueClick worked great, so you still pointed me in the right direction. Thanks!
|
|
|
|
Post by theycallmek on Mar 25, 2017 18:59:08 GMT
No prob, glad you got it figured out  |
|
|
|
Post by theycallmek on Mar 25, 2017 18:59:35 GMT
No prob, glad you got it figured out |
|
|
|
Post by AnkuLua on Mar 26, 2017 9:27:09 GMT
|
|
