eleck
New Member
Posts: 20
|
Post by eleck on Apr 24, 2017 6:15:40 GMT
So, here's Timber Tracks. * Strums Wonder Wall*Just completed one run... somehow one battle in the first battleex got skipped (guessing a gil mis-read) so let me know if it needs adjusted. Ran this at a 1.5 lagx, will do another run tomorrow at 1.0 to make sure it's still alright. Timber_Tracks_Exploration:leaveafterboss|bosscheck,38|right,1000|right,1|down,1000|battlex,lr,4812,14,2000,left|up,1500|right,2000|left,1|up,1|up,1|battleex,lr,9620,29,3000,right|left,10|up,1000|left,1000|down,1000|left,2500|right,4|down,1|left,2000|left,7000|down,1|left,7000|left,7|up,1000|left,1000|up,1000|left,2|up,1000|down,1000|right,3|down,1500|left,6000|left,7000|left,7000|left,7000|right,1000|right,13|up,1000|down,2|left,5000|left,7000|left,7000
Z12 Beta 1 is working flawlessly. It's phenomenal!
|
|
|
Post by Sikat on Apr 24, 2017 16:04:57 GMT
Z12 BETA 2 is out, revamped interface. Also added Provoke, Ultima, Sing, and Dance to the list of actions. Provoke is useful to somewhat direct Snort
|
|
|
Post by Sikat on Apr 25, 2017 16:09:00 GMT
BETA 3 is out. I think this should be the final beta and nothing more will change until the release of Z12. I fixed some issues with boss detection as well.
|
|
drekx
New Member
Posts: 31
|
Post by drekx on Apr 26, 2017 2:16:44 GMT
I was wondering what the combination was for using chaos wave (T.Terra) and red card (Setzer) or if their skills are not supported. Thanks.
|
|
|
Post by Sikat on Apr 26, 2017 4:39:47 GMT
Chaos wave is "Blast" with 35MP, Red card is "Blast" with 40MP.
I guess this won't be the last BETA, I'm still finding some faults especially with boss detection when using older computers.
|
|
|
Post by Sikat on Apr 28, 2017 10:44:10 GMT
Z12 is out, with help on how to use custom battle function inside the script itself.
|
|
drekx
New Member
Posts: 31
|
Post by drekx on Apr 29, 2017 0:09:32 GMT
Great job Sikat on the script, I've been able to successfully use it now. There's a small problem though, I have 2 setzers and I notice for them the script doesn't always find the skill. For the 1st turn of the boss I have both setzers use cursed card but it doesn't always find it as it just scrolls past it. Haven't had any issues with T. Terra skills, I even have her buff herself 1st turn before using chaos wave on 2nd+ turn on boss.
|
|
|
Post by Sikat on Apr 29, 2017 0:19:31 GMT
Great job Sikat on the script, I've been able to successfully use it now. There's a small problem though, I have 2 setzers and I notice for them the script doesn't always find the skill. For the 1st turn of the boss I have both setzers use cursed card but it doesn't always find it as it just scrolls past it. Haven't had any issues with T. Terra skills, I even have her buff herself 1st turn before using chaos wave on 2nd+ turn on boss. Did it stop at the cursed card and not find it or did it scroll past through it not stopping? I'm still finding hiccups on it, since the skill combinations are exceedingly huge.
|
|
drekx
New Member
Posts: 31
|
Post by drekx on Apr 29, 2017 0:20:05 GMT
Sometimes it does a brief stop and then goes past it and other times it just completely goes past it.
|
|
|
Post by Sikat on Apr 29, 2017 0:22:28 GMT
Mhmmm......
Did you notice that it scrolls down, stops, then scrolls a little bit more not lining up sometimes? It's been a problem to me.
|
|
drekx
New Member
Posts: 31
|
Post by drekx on Apr 29, 2017 0:25:07 GMT
I'm going to have to observer more though I did see one or two instances of that.
|
|
drekx
New Member
Posts: 31
|
Post by drekx on Apr 29, 2017 0:49:23 GMT
Ok I have observed more and what seems to happen is that when it scrolls down it sometimes scrolls a bit too much or too little so things aren't lined up. Once this condition is met it sometimes just checks and sees things not lining and just moves onto the next set of skills. Normally the next set will line up but sometimes it has already passed that skill. If there isn't a check on things then it doesn't find a match for icons cause it's cut off, but funnily enough the next scrolls it is able to line the items again or at least that's my experience so far. Because of this it sometimes also fails to find Red Card on setzer if it isn't on the 1st screen. T. Terra seems to fine though but I think it's because most of the skills (the buff to chaos wave and chaos wave itself) are at the bottom of the list and it's impossible to not be lined up at the bottom.
|
|
|
Post by Sikat on Apr 29, 2017 11:07:29 GMT
1. Did you run more than one emulator per PC? 2. Did you see it stopped and lined up the skills fine, then half a second or so later it moved a bit so the skill isn't lined up anymore? 3. What are your settings, especially resolution?
#2 is a known problem that I still have no solutions for. I might try to divide the scrolling bit by bit but that will increase the time to find those skills.
|
|
drekx
New Member
Posts: 31
|
Post by drekx on Apr 29, 2017 13:14:03 GMT
1. I don't run more than one emulator per PC. 2. It's the opposite, the skills don't line up so it then moves on. The funny thing is that when it moves on to the next set of skills it fixes itself so they are all lined up again. 3. 1280x720 with 192 DPI.
|
|
|
Post by Sikat on Apr 29, 2017 16:32:14 GMT
I checked and I have instances where it misread 5s for 6. That might be the issue.
If you could turn on debug mode and repeat the process to make it fail it would be helpful.
|
|